Bonus: For a limited Time Comes With Free Final Load Ball and The Ken Brooke Series – The Chop Cup Booklet – $54 Value – FREE!
The Ken Brooke Master Chop Cup is an authentic reproduction of the first chop cup created by Ken Brooke. Sometimes referred to as the Ken Brooke Highball Cup, it was designed as a tall cup. The cup accommodates an impressive baseball size load. In many ways it strongly resembles the bottom half of a cocktail shaker. It is a heavy copper cup even though it is not spun from a heavier gauge copper, weighing in at 8.5 oz (240g).
Technically, the Ken Brooke cups are unique as the gaff is spun in on the outside of the cup rather than on the inside. This means the inside of the cup is seamless. It is an old style of gaffing a cup, but perfectly functional and authentic in every way. Some early versions of this cup had a gaff that was so strong you had to really slam the cup to dislodge the ball, adjustments have been made to the gaff to achieve a better balance and now a much lighter touch is all that is required.
Each cup is hand spun from the original RNT II Ken Brooke Master Chop Cup tooling in .050 copper. The exterior and interior of the cup is a brushed satin finish.
- Ken Brooke Master Chop Cup
- 1x 1 1/8 inch RNT Red Ball
- 1x 1 1/8 inch RNT Red Magnetic Ball
- 1x Final Load Ball
- Velvet Bag
- Ken Brooke Master Chop Cup | Copper | Satin Finish made in USA.
- Ken Brooke Series – The Chop Cup – Number 2 – Booklet